Low-Profile Boards - Fujitsu ESPRIMO P5635 Operating Manual

System upgrades

Low-profile boards

You will need to fit a corresponding slot adapter first before you can install a low-profile board in a
normal board slot.
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are
connected together with a screw.
► Remove the desired board slot cover and undo the screw.
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
!
cover (cooling, fire protection or EMC regulations to be complied with).
Mounting slot adapter
1
2
Removing slot adapter
2
1
44
► Fit the slot adapter on the slot cover of the
low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see "
board " ).
X
► Unscrew the screw (1) and remove the slot
adapter (2).
A26361-K1006-Z220-1-7619, edition 2
I nstalling a
X