Disassembly - Sharp QT-CD700W Service Manual

DISASSEMBLY

Caution On Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling, to keep it safe and
ensure excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit.
After servicing the unit, be sure to rearrange the leads where they were before disassembling.
4. Take sufficient care on static electricity of integraged circuits and other circuits when servicing.
STEP REMOVAL
1 Rear Cabinet
2 Front Cabinet
3 Main PCB ASS'Y
4 CD Control PCB ASS'Y
5 Tape Mechanism
6 R/P PCB ASS'Y
7 CD Mechanism
8 Power PCB ASS'Y
TAPE MECHANISM
OPEN CASSETTE HOLDER
PROCEDURE FIGURE
Screw.....S08x5
5-1
Screw.....S06x2
Screw.....S06x2
5-1
Screw.....S06x4
Screw.....S06x7
6-1
Screw.....S02x1
Screw.....S15x1
Screw....S04x6 5-2
Screw....S06x4 5-2
Screw.....S06x2 5-2
Screw.....S11x4 6-1
Screw.....S02x1 6-2
R/P PCB ASS'Y
CD CONTROL PCB ASS'Y
Figure 5-2
CD Door
Front
Cabinet
Figure 5-1
(S06) 2
3 10PA
(S06)
3 10PA
S04X6
7
QT-CD700W
(S06) 2
3 10PA
(S08) 2
3 14PA
Rear
Cabinet