xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Accounting Method Lists Settings
Here users can create and configure accounting method lists on the Switch.
To view this window, click Security > Access Authentication Control > Accounting Method Lists Settings as
shown below:
The fields that can be configured are described below:
Parameter
Method List Name
Priority 1, 2, 3, 4
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to an Enable Method List defined by the user.
none - Adding this parameter will require no authentication needed to access the Switch.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
Figure 8-74 Accounting Method Lists Settings window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following accounting
methods to this method list:
none - Adding this parameter will require no accounting.
radius - Adding this parameter will require the user to be accounting using the RADIUS
protocol from a remote RADIUS server.
tacacs+ - Adding this parameter will require the user to be accounting using the
TACACS protocol from a remote TACACS server.
345