Recoil Starter Grip; Recoil Starter Grip; Ignition Switch; Ignition Switch - Husqvarna WG3213P/968999114 Operator's Manual

1. Recoil Starter Grip

IMPORTANT INFORMATION
Do not let recoil cord snap back by itself.
This may damage the cord or the recoil
starter assembly.
Pull the recoil starter grip slowly until you feel
compresion, then pull it briskly.
Normally this engine will not backfire. If you
get backfires, contact your Husqvarna dealer
for service.

2. Ignition Switch

The ignition key switch is placed on the
control panel.
CONTROLS

Recoil starter grip

Ignition key
8011-498
8011-693
15
English-