Operation Instructions; Bathside Control Systems - Aquatic Infinity Owner's Manual & Installation Manual

Whirlpool bath
Hide thumbs Also See for Infinity:
Table of Contents

Advertisement

NOTE: DO NOT START PUMP UNTIL ALL JETS ARE SUBMERGED. WATER LEVEL SHOULD BE 2" ABOVE HIGHEST JET.

BATHSIDE CONTROL SYSTEMS

3: SEQUENCER MASSAGE MODE
2: BLOWER & CYCLE
1: ON/OFF PUMP
KeyPad A Functions
1: ON/OFF PUMP
1st Press:The pump starts
2nd Press:The pump stops
2: BLOWER & CYCLE
1st Press: Blower starts at high speed.
2nd Press: Wave Cycle - Speed goes gradually from maximum to minimum.
3rd Press: Blower stops
3: SEQUENCER MASSAGE MODE
1st Press: Massage Mode A Starts.
2nd Press: Massage Mode B Starts.
3rd Press: Massage Mode C Starts.
4th Press: Massage Mode D Starts.
5th Press: Massage Mode Stops.
4: SPEED INCREASE
When the blower is on without the sequencer, press and hold to increase the blower speed. Release pres-
sure at the desired speed. When the sequencer is on, press to increase the speed at which the sequencer
operates. Release pressure at the desired speed.
5: SPEED DECREASE
When the blower is on without the sequencer, press and hold to decrease the blower speed. Release
pressure at the desired speed. When the sequencer is on, press to decrease the speed at which the
sequencer operates. Release pressure at the desired speed.
6: CHROMATHERAPY
1st Press: Turn on the light in white
2nd Press: Rainbow cycle – Low speed
3rd Press: Rainbow cycle – High speed
4th Press: Turquoise
5th Press: Blue
6th Press: Magenta
7th Press: Red
8th Press: Orange
9th Press: Yellow
10th Press: Green
11th Press: Turn off the light
Press and hold 2 sec. at anytime to turn off the chromatherapy
Advanced Programming
INTEGRATED 20 MINUTE AUTOMATIC TIMER
Integrated 20 minute automatic timer on the complete system. Count down starts with the last system turned on.
Blower LED will blink until the purge occurs except during the first minute.
DRYING CYCLE
A 1 minute automatic drying cycle will start 20 minutes after the blower is turned off.
The blower LED button blinks while waiting for the purge cycle.
12

OPERATION INSTRUCTIONS

4: SPEED INCREASE
5: SPEED DECREASE
6: CHROMATHERAPY
Infinity Owner's Manual & Installation Guide
A
BACKLITE KEYPAD
OR
LED
ON
OFF
ON
BLINKS
OFF
ON
BLINKS TWICE
follows the speed of the valve
BLINKS 3 TIMES
follows the speed of the valve
BLINKS 4 TIMES
follows the speed of the valve
OFF
ON
When Pressed
ON
When Pressed
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
Aquatic

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents