Sharp GX30i User Manual page 154

To Set the Network Manually
Perform the following if you wish to connect to the
networks other than the preferred network which is
automatically connected to.
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen".
Press a or b to highlight "Select Network", then
2.
press to select.
Press a or b to highlight "Manual", then press
3.
to select.
Press a or b to highlight the network from the list,
4.
then press to select.
Adding a New Network
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen".
Press a or b to highlight "Select Network", then
2.
press to select.
Press a or b to highlight "Add New Network",
3.
then press to select.
4.
If there is no entry, perform the following step. If
there is an entry, press
Press a or b to highlight "Add", then press
5.
select.
154 Settings
, then go to step 5.
to
6.
Enter the country code, then press
7.
Enter the network code, then press
8.
Enter a new network name and press
Editing the Preferred List
To Change the Position of a Network in the
Preferred List
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen" on page 153.
Press a or b to highlight "Select Network", then
2.
press to select.
Press a or b to highlight "Set Preferred", then
3.
press to select.
Press a or b to highlight the name of the network
4.
to change the position from the list, then press
to select.
Press a or b to highlight "Insert" or "Add to end",
5.
then press to select.
To Delete a Network from the Preferred List
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen" on page 153.
Press a or b to highlight "Select Network", then
2.
press to select.
.
.
.