Set The Menu Language; Complete Channel Search; Changing Channels; Next Steps - RCA SCENIUM User Manual

Connections & Setup
Main Menu
0
Go Back
English
1
Closed Captioning Continue Setup Highlight with the
2
Cancel Setup
Español
Resalte con las flechas
Français
Mise en surbrillance avec
Press or
select it. Press
Main Menu
Input to search:
0
Go Back

Cable Input
1
Continue Setup

Antenna Input
2 Cancel Setup
Channels to search:

Digital channels

Analog channels
Other search options:

Detect antenna or cable setting

Include previously found channels in search
Start
Press to make changes to this screen's settings.
Press OK to skip to the next step in the setup routine.
Tip
The first Channel Search takes several minutes if
the TV is searching for analog and digital
channels and cable and antenna inputs are
being searched. You may want to leave and
come back later.
22
Downloaded from www.Manualslib.com

Set the Menu Language

Preferences
1. Use arrow buttons to highlight your preferred language for the
and arrows. Select with the OK button.
y . Seleccione con el botón OK.
2. Press OK to select that language.
et . Sélection avec OK.
3. Select Continue Setup.
to point to an option, then press OK to
to return to the menu.

Complete Channel Search

Assisted Setup Channel Search
Channel Search finds channels
Even though this initial channel search can take several minutes, it is important
for you. Check fewer boxes to
make the search faster (but
less complete) and vice versa.
to complete in order for your TV to display channels and programming. Make
The first time that you do a
Channel Search, put a check in
all the boxes to do a thorough
sure you have connected cable and/or off-air antenna to the corresponding
search for channels.
inputs before you start channel search.
To add a channel that Channel
Search didn't find, clear all
menus and directly tune to the
1. To do a complete channel search, check each box that pertains to your TV.
channel with the number keys.
2. Select Start to begin the setup.
3. When the channel search is complete, a message screen appears. Select

Changing Channels

Depending upon the type of signals you have connected to your HDTV, you
might notice that the channels change slower than you're used to. This is
perfectly normal. Your HDTV is able to interpret and display both analog
(NTSC) and digital off-air and cable signals (QAM and ATSC).

Next Steps

Now that you've finished the Assisted Setup, you're ready to watch TV. This
might be a good time to program your remote control. The remote control that
came with this TV can be programmed to operate other components. Go to the
next chapter to find out how to program your remote.
• Chapter 2: Using the Remote Control
• Chapter 3: Using the TV's Features
• Chapter 4: Using the TV's Menu System
• Chapter 5: Reference
manuals search engine
menu system.
For example, if you're only receiving cable from the CABLE INPUT,
highlight Cable Input and press OK to place a checkmark in the box.
Continue. Another message screen appears telling you that you've
completed the Assisted Setup. Select Continue on the left.
Notes: If you skip Channel Search now, you can access it later through
the Connections menu. See Chapter 4 for more details.
If a cable box is connected to your TV's CABLE INPUT, or a CableCARD
is in use, Channel Search won't work for Cable Input.
Chapter 1