Table of Contents
Advertisement
4.1.4
Windows NT 4.0
Before installing the display driver in Windows NT 4.0, make sure that
you have installed Windows NT 4.0 Service Pack 3 or later to take
full advantage of the AGP features of your card.
1. Boot Windows NT system and log on as Administrator.
2. Switch display properties to VGA mode (16 colors, 640 x 480 pixels),
then restart your computer.
3. After startup, right-click the Windows NT desktop and click Properties.
4. Select the Settings tab.
5. Select Change Display Type.
6. Select Adapter Type and click Change.
7. Click Have Disk.
8. Insert the support CD.
9. Assuming that your CD-ROM drive letter is D, type D:\NT40 or click
Browse to select the path of the display driver for Windows NT then
click OK.
10. Select your ASUS VGA Card model then click OK.
11. Windows NT will once again prompts for confirmation. Confirm
installation of display drivers to copy all the necessary files. When
done, click Close to return to the Display Properties box then click
Apply.
12. The System Settings Change dialog box appears. Click Yes to reboot
computer.
13. Windows NT restarts the default settings. The Display applet appears
to allow for mode selection.
16
ASUS V9950 Series User Guide
Advertisement
Table of Contents
