Advertisement
3. Reinstall jet internal by
inserting it in any jet
opening of the same jet
type. Rotate the jet
internal clockwise with
light pressure until your
feel the retaining
mechanism "snap" in
place. The jet's nozzle
should rotate freely to
the left or right using
only fingertip pressure.
If jet rotation appears
sluggish or obstructed
at this time, repeat
steps 2-3 until condition
clears. If condition
persists, contact dealer
for technical support.
6. Draining and Refilling
Spa water must be disposed of in accordance with local codes. Please
consult your dealer/installer for proper disposal methods.
1. First turn off the power supply to the equipment.
2. Your inground spa can easily be drained with a small power sump
pump or drain attached to the auxiliary spa pump, whichever the
installer provided. To avoid the spa from shifting or becoming dis-
placed from the deck, drain your spa only when ground water is not
present. Never attempt to drain spa while it is raining. It is best to
wait a few days after rain before attempting water replacement.
Never dispose of water at or near the spa shell.
3. The spa should only remain empty long enough to be inspected,
wiped clean, and then refilled. Do not leave the spa drained for
extended periods of time in direct sunlight or damage may
occur to the acrylic surface.
4. To start your spa, refer to restarting your system (page 1).
5
Advertisement
