Honda CBR600RR 2007 Owner's Manual page 136

Rear Suspension Damping
Refer to Saf ety Precautions
Rebound Damping
LEFT SIDE
(1) damping adjuster
(2) punch mark
(3) reference punch mark
on page 70 .
(1)
(3)
(2)
To adjust to the standard position:
1. Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
2. Turn the adjuster counterclockwise
approximately 2 1/2
punch mark ( ) on the adjuster aligns 2
with the reference punch mark ( ). This
is the standard position.
To Reduce Rebound Damping (SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Rebound Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
Servicing Your Honda
Suspension
1
turns so that the
3
127