Motorola ASTRO XTSTM 2500 User Manual page 125

Model 3
Hide thumbs Also See for ASTRO XTSTM 2500:
Table of Contents

Advertisement

Motorola rapid-rate battery chargers contain a temperature-sensing
circuit to ensure that batteries are charged within the temperature
limits stated above.
Battery Charge Status
Your radio can indicate your battery's charge status by the following:
LED and Sounds
you see the LED blinks red when the PTT Button is pressed
indicating low battery
you hear a low-battery "chirp" (short, high-pitched tone)
Conventional Fuel Gauge Symbol
A blinking fuel gauge symbol (
battery voltage drops to low level. In this case, replace the battery
with a fully charged one.
Smart Fuel Gauge Symbol
Note: Smart battery will be available at a future date.
Consult the Smart Battery manual. All conditions must be met for a
battery to be classified as a "Smart Battery." When your radio has a
Smart Battery installed, the fuel gauge symbol is always displayed.
Gauge shows:
b
j
k
l
Replace the battery with a fully charged one when the fuel gauge
shows the lowest level.
ASTRO XTS 2500/XTS 2500
b
) is displayed only when the
if the battery's charge is:
10% or less (at 10%, the gauge begins blinking)
I
Model III
71% to 100% full
41% to 70%
11% to 40%
Helpful Tips
109

Advertisement

Table of Contents
loading

This manual is also suitable for:

Astro xtstm 2500i

Table of Contents