ZyXEL Communications NBG4604 User Manual page 12

2. Take the other end of this cable and insert it into blue WAN port of your router.
Take another ethernet cable and plug it into any of your router's remaining
ports (labelled 1-4).
3. Take the other end of this second ethernet cable and plug it into the relevant
socket on the patch panel associated with the room where you would like
service provided. For example, if you wish to enable internet service to your
study, connect the ethernet cable into the socket marked 'study' or the number
corresponding to the room socket ID.
4. Using another ethernet cable, take one end and plug it into a wall socket in the
relevant room that your internet service has been enabled to.
5. With the other end of this cable, connect to your PC/internet-enabled device
through its internet port.
Internet User Guide- Zyxel NBG4604
routers
12
Last Amended:11/03/2014