Printing On Discs With A Commercially Available Software Package; Notice For Barcode Printing - Epson PP-100AP User Manual

❏ The quality of the disc determines print quality. It is recommended to use only the
specified disc type.
❏ Do not use a cracked, warped, or deformed disc because it may break in pieces inside
the product and cause malfunction or injury.
❏ A disc may become unreadable or unwritable if it has a small scratch or dirt; therefore,
please handle it with care.
❏ Hold disc by the edge, and do not touch either surface.
❏ The completed job display of EPSON Total Disc Monitor shows the number of
successes, number of failures, and number of discs printed.
❏ Do not use discs with lens cleaner, a label sticker, or condensation on them as it may
cause mechanical error or malfunction.

Printing on Discs with a Commercially Available Software Package

When you print on discs with a commercially available software package that supports disc
printing, you have to make the following settings.
Size
Type
Margins on all sides

Notice for Barcode Printing

❏ When printing barcodes and 2D codes, be sure to use Epson brand ink cartridges.
❏ When printing barcodes and 2D codes on discs that are not Epson specified discs,
check whether the printed barcodes or 2D codes can be read correctly by a scanner.
❏ Do not place barcodes or 2D codes where they overlap other print data, or where they
extend beyond the print area.
❏ Barcodes and 2D codes use the ratio of black to white to indicate information. If ink
penetration results in a deterioration of the ratio of black to white, barcodes and 2D
codes may not be able to be read correctly. Check whether the printed barcodes and
2D codes can be read correctly by a scanner.
❏ If a barcode printed with bidirectional printing cannot be read correctly, align the print
head and then print the barcode, or print the barcode with unidirectional printing.
124 x 124 mm (4.88 x 4.88")
CD/DVD Label, CD/DVD Premium Label, or Epson
Specified CD/DVD Label
2 mm (0.08")
26
Publishing Discs