Using Pre-Dial; Using Redial; Using Memory Dial; During A Call - Amytel AT3100 Owner's Manual

Using Pre-dial

Pre-dial allows you to enter a telephone number and verify it on the display
before you place the call. The LCD will display the last 12 digits dialed but
you can enter up to 20 digits.
1. Use the number pad to dial the phone
number. The display shows the digits
as you enter them.
2. If you make a mistake, press
erase one digit at a time, or press and
hold for 2 seconds to clear the entire number and return to Standby.
i
3. Press to dial the telephone number.

Using Redial

Redial works whether the last number is dialled manually, from the Memory
Dial or from the CID record.
1. Press . The last phone number
you called is shown on the display.
2. Press and hold for 2 seconds to
return to standby.
3. Press to dial the phone number.
Or
1. Press and wait for the dial tone.
2. Press . The last phone number you called is dialled out. The
display shows the digits dialed.

Using Memory Dial

You need to create a memory dial list before using this procedure. See
Setting Up Memory Dial on page... .
1. Press . is turned on.
2. Press the digit key 0 ... 9 . The
display shows the phone number
stored in that particular memory
location.
3. Press and hold for 2 seconds to return to standby
4. Press to dial the phone number.
to
is turned on.
will turn off.
8

Call Back from CID

This feature works only when the CID record contains a valid phone number.
1. Press to bring up the CID record.
2. Press to dial the phone number.

During a call...

When you are talking on the phone, you could mute the call and adjust the
volume.

Muting the Call

1. Press to mute the call.
turned on. The caller would not be
able to hear you but you would still
be able to hear the caller.
2. Press again to unmute the call
and turn off.

Adjusting the Volume

Press to adjust the receiver volume to High, Medium or Low.

CID on Call Waiting

If you have subscribed to this service, the telephone will show the phone
number of another incoming call while you are talking on the phone.
If you press , the current call will be put on hold and you could talk with
this second caller. Subsequent presses of
2 callers.
In any case, the LCD will show the phone number of the first caller.

REVIEWING CID

Your telephone keeps the last CID record received.
1. turns on when there is a new CID
record.
is
will toggle you between these
9