Siemens IT User Manual page 17

Automatic telephone program
Hold a telephone near your hearing instru-

ment (*).
The hearing instrument automatically switches
to the telephone program.
Move the telephone away from your hearing

instrument.
The hearing instrument switches back to the
previously used program.
You can also select the telephone program

manually by using the push button.
When operating the hearing instrument in

telecoil mode, the wireless function may cause
a pulsing noise. This is due to the pick-up of the
transmission signal. When your hearing instru-
ment is in telecoil mode please use the remote
control only with a distance greater than 10 cm
(4 inches).
(*) AutoPhone magnet accessory
Not all telephones produce a magnetic field strong
enough to activate the AutoPhone function. In this case,
use the Siemens AutoPhone magnet, which is available
as accessory, and attach it to the telephone receiver to
activate the AutoPhone function.
Functionalities
17
EN
HU
RO
FR
DE
AR