Page 1
Propulse II Electronic Ear Irrigator User Manual EAR CARE TRAINING Ear Care Training is available and can be purchased Further details are available from Mirage on 0845 130 5440 fl .o .o z 8 0 0 7 0 0 6 0 0...
Page 2
Water Jet ‘Stop Button’ Pressure/Flow Control Knob The Propulse II Ear Irrigator must not be immersed in water. Cleaning should be done Operating Switch Green ‘Power On’ Light by hand, wiping with a damp cloth only (see cleaning guidelines).
TECHNICAL DATA SAFETY INFORMATION Voltage rating 220 to 240 V AC The Propulse II is CE marked for and complies with: Power rating 20 VA Medical Devices Directive - CE 0499 Frequency 50 to 60 Hz Electrical Safety - EN60601-1 EMC Safety - EN55014;- EN61000;- EN60601...
The clinical criteria for use of the Propulse II should be noted before treatment is commenced. The Propulse II Ear Irrigator must only be used with a mains power supply that is the same as that indicated on the data panel on the base of the device.
Page 5
Propulse machine (with foot control). GUIDELINES FOR EAR IRRIGATION USING THE Jug containing tap water to 40 degrees C. PROPULSE II ELECTRONIC EAR IRRIGATOR Noots tank. Jobson Horne probe and cotton wool. Tissues and receivers for dirty swabs and instruments PRINCIPLES - Irrigating the ear is carried out to: Sufficient disposable “one use”...
Increase the pressure switch as determined by the Run the Propulse II Electronic Ear Irrigator for a few seconds to fill the pump and aural condition. It is advisable that a maximum of 2 reservoirs of water are used in flexible tubing.