Safety System; Fuel Filter - Husqvarna EZ4824K / 966038201 Operator's Manual

Safety System

The machine is equipped with a safety system that
prevents starting or driving under the following
conditions.
The engine can only be started when:
1. The mower deck is disengaged.
2. The steering controls are in the outer, locked
neutral position.
3. The parking brake is on.
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
If the machine starts when one of these conditions
is not met, turn the machine off and repair the safety
system before using the machine again.
Make sure the engine stops when the park brake
is not engaged and the operator leaves the seated
position.
Check that the engine stops if the mower blades are
engaged and the driver temporarily moves off the
drivers seat.

Fuel Filter

Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
1. Replace the filter as follows:
2. Move the hose clamps away from the filter. Use
flat-nosed pliers.
3. Pull the filter loose from the hose ends.
4. Push the new filter into the hose ends. Position the
filter with the "floW" arrow pointing up toward
the fuel pump. If necessary, a soap solution can
be applied to the filter ends to ease mounting.
5. Move the hose clamps back toward the filter.
MAINTENANCE
Steering controls locked in neutral
IMPORTANT INFORMATION
In order to be able to drive, the driver must
sit in the seat and release the parking brake
before the steering controls can be moved into
the neutral position, otherwise the engine will
stop.
Fuel filter
8058-026
8011-468
37