Making A Call; Call Connected Options - Cisco SPA 504G Setup And User Manual

________________________________________________________________

Making a Call

When you enter a phone number to make a call the soft keys become:
dial delChr
dial
delChr
clear
cancel
<< >> Moves cursor left or right through an entry without deleting
*code
alpha

Call Connected Options

When your call is connected the soft key arrangement changes to:
hold endCall
hold
endCall Terminates the call.
Copyright © 2005-2012
clear cancel 
Once you have entered a number or short code you can invoke
dialling by either picking up the receiver, pressing the speaker
key or pressing the dial soft key which will use the speaker
if the handset is on the phone.
Allows you to delete the last number or character on the LCD
display.
deletes all the numbers or characters on the LCD display.
Cancels the current operation and takes you back to the previous
state.
characters.
Allows you to choose to activate some special function 'star
codes'. Full details can be found in the Cisco Small Business Pro
IP Phone SPA 50X User Guide which can be obtained from the
Cisco web site. However, you should be aware that the portal
website allows you to set up many of these functions in a more
convenient and controlled way and which can be used on other,
external phones
Switches between numbers and letters on the phone keyboard.
conf xfer
If you wish to put a current call on hold then either press the
hold soft key or the button with the hand symbol. This keeps the
other party on the line (hearing either silence or Music on Hold if
that has been configured) but communication is suspended until
you press the Resume soft key on the handset. Note that
pressing the hand symbol button again will not resume the call.
<< >>
bxfer

*code alpha
9/14