Table of Contents
Advertisement
Annex 4 - Configuring SMS, MMS and e-mail
checkbox, then tap Next.
8. In the Your e-mail provider: field, select
Internet e-mail or Custom domain as
required.
9. Tap Next.
10.If you are setting up a custom domain e-mail
account, enter the domain of your e-mail
address provider in the E-mail provider
domain: field, then tap Next.
11.Enter the name that you want displayed
when you send e-mail in the Your name:
field.
12.Enter a unique name for this account in the
Account display name: field, then tap
Next.
n
NOTE: This name cannot be changed
later.
13.Enter the name of the incoming server in the
Incoming mail server: field.
14.Select the server type that hosts your e-mail
mailbox in the Account type: list (POP3 or
IMAP4), then tap Next.
15.Enter the user name assigned to you by
your ISP in the User name: field. This is
usually the first part of your e-mail address,
before the '@' sign.
16.Tap Next.
17.Enter the name of the outgoing server in the
Outgoing (SMTP) mail server: field.
18.Tick the Outgoing server requires
authentication checkbox if the outgoing
server requires authentication. This
authentication will use the user name and
password that you have already entered.
19.Tick the Use the same user name and
password for sending e-mail checkbox if
required.
20.Tap the Advanced Server Settings link to
set the following additional settings if
required.
Tick the checkboxes if you wish to enable
Secure Sockets Layer (SSL) connection.
129
Advertisement
Table of Contents
