Table of Contents
Advertisement
Charger
Motor Speed
Battery
Power Switch
Run Time
(with Fully Charged Battery)
Air Flow
Sound Level
Overall Dimensions
Unit Weight
Accessories
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
Keep your work area clean and well lit. Cluttered benches and dark areas
1.
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as blown dirt, rocks, sticks, etc. Provide barriers or shields as need-
ed.
Grounded tools must be plugged into an outlet properly installed and
1.
grounded in accordance with all codes and ordinances. Never remove the
For technical questions, please call 1-800-444-3353.
SKU 93726
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
GENERAL SAFETY RULES
READ AND UNDERSTAND ALL INSTRUCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
ELECTRICAL SAFETY
Power Input: 120 VAC / 60 Hz
Adapter Plug Type: 2-Prong
Power Output: 15 VDC, 0.5 Amps
Charge Time: 10-12 Hours
14,700 RPM
15 VDC, 7 Ah Rechargeable, Sealed, Lead-Acid
Rocker Switch (ON/OFF)
Approximately 30 Minutes
52.5 f/s or Faster; 38 CFM
90 dB Maximum
37-1/2" L x 6-1/2" W x 9-5/8" H
9.5 Pounds
Wall Bracket w/Hardware
WARNING!
Page 2
Advertisement
Table of Contents
