Pioneer AVD-W6010 UC Service Manual page 61

- HIDEAWAY SECTION
-
Removing the Case (not shown)
1. Remove the five screws and then remove the Case.
-
Removing the Sub PCB (Fig.3)
Remove the solder and then straight the tabs at
fore locations indicated.
Disconnect the connector and then remove the Sub PCB.
- Removing the Main PCB (Fig.4)
Remove the solder and then straight the tabs
at four locations indicated.
Remove the Main PCB.
AVD-W6010
Sub PCB
Main PCB
Fig.3
Fig.4
61