Settings - Asko D5434 Operating Instructions Manual

Settings

Settings menu overview:
P R O G
Do as follows to open the settings menu:
1. Turn off the dishwasher using the main power switch. Wait about five seconds.
2. Then press the main power switch again. Wait until the display turns on before the next step.
3. Within five seconds, press and hold the Program selector (wait for the audio signal confirming the
+
PROG PROG
button press), then press the Drying button. Keep the buttons pressed until the symbols for the
Auto wash and Rinse & Hold programs start to flash.
You can now adjust the following settings:
1: Child lock
(button lock)
2: Buzzer volume
3: Operation volume
4: LCD contrast
5: Rinse aid
Finally, press Start/Stop to save and exit the menu.
18
START
STOP
Description
0 (Off) or 1 (On)
0 (Off), 1–4
0 (Off), 1–4
-1, 0, +1, +2, +3
0 (Off), 1–6
Confirm selection and open next
menu.
Current menu.
Current selection.
Browse selections.
You can activate the child lock (button lock) option to pre-
vent children from starting the dishwasher.
Press the Temperature and Drying buttons simultaneously
to temporarily deactivate the button lock when you want to
start the dishwasher. The button lock is automatically reac-
tivated after 2 minutes.
The dishwasher uses a buzzer to indicate when a program
is finished or when a fault has occurred.
This sound is used to confirm each button press.
For adjusting the contrast of the display.
Rinse aid dosage setting.