Usa, Canadian, And International Channels; Keypad Locking; Noaa Weather Channels - Standard Horizon HX100 Owner's Manual

6.5 USA, CANADIAN, AND INTERNATIONAL CHANNELS

1. To change from US to International or Canadian Marine Channels, hold
down the
to International, and to Canadian with each press.
2. "U" appears on the LCD for the USA band, "I" appears
for the International band, and "C" appears for the Ca-
nadian band
3. Refer to the marine channel charts in section "9. VHF MARINE CHAN-
NEL ASSIGNMENTS" for allocated channels.

6.6 KEYPAD LOCKING

In order to prevent accidental channel change, the HX100/HX150's keypad
may be locked.
Press and hold the
PTT, , and
changed. The "
of the display, to indicate that the functions are locked.
Press and hold the
dio.

6.7 NOAA WEATHER CHANNELS

1. To receive a NOAA (National Oceanic and Atmospheric Administration)
weather broadcast, press and hold the
transceiver changes to the weather channel mode and the radio will
be set to the last used NOAA weather channel. This
mode consists of a preset memory bank containing the
NOAA weather channels.
2. Press the
3. To exit from the weather channel mode, press and hold the
two seconds. The transceiver will revert to the channel you were using
prior to switching to the weather channel mode.
Page 24
key and press the
key to lock the keypad (except the
keys) so that they are not accidentally
" icon will appear on the channel number
key until the "
or key to change to other weather channels.
key. The band will change from USA,
" icon disappears to unlock the ra-
key for two seconds. The
key for
HX100/HX150