Major Operating Controls And Their Functions; System Connections; Specifications; Optional Accessories - Panasonic Machine Vision GP-MF130 Specifications

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Right Side View
Actual size
Left Side View
123456 SW1
1: Field / Freame
2: Electronic shutter D0
SW2
3: Electronic shutter D1
4: Electronic shutter D2
SW1
5: Electronic shutter D3
6: Not used

SYSTEM CONNECTIONS

Camera
GP-CA34
130

OPTIONAL ACCESSORIES

Camera Cable
GP-CA34
APPEARANCE
Medical & Industrial Video Company
A Division of Panasonic Broadcast & Television Systems Company
A Unit of Matsushita Electric Corporation of America
Executive Office: 50 Meddowlands Pkwy 4D-4, Secaucus, New Jersey 07094 (201) 392-6674
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00630 (809) 750-4300
SW2
1: Not used
2: Not used
3: Not used
4: Not used
5: HD 75Ω OFF/ON
6: VD 75Ω OFF/ON
Coaxial Cable Video Monitor
IN
Coaxial Cable
12V DC
Power Supply
HD IN
VD IN
Camera Cable
GP-CA33
3-1/16" (77.8)
2-9/16" (65)
1-1/8" (29)
5/16" (8)
Lens (optional)
6-M3
7/16" (11.5)
1-3/4" (44.5)
Unit: inches (mm)
• Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations.
Rear View
Actual size
Rear View
VR3 VR5 12pin Conector
BNC

SPECIFICATIONS

Pick-up Device
Image Size
VIDEO
OUT 75Ω
Synchronization
Hi-Z
Horizontal Resolution
Minimum Illumination
Signal to Noise Ratio
Gamma
Gain Selection
Electronic Shutter
Lens Mount
Vibration Resistance
Shock Resistance
Power Source
Ambient Temperature
Dimensions
Weight
DISTRIBUTED BY:
VR3: Pedestal Control
VR5: Manual Gain Control
BNC Conector: Video out 2
Camera Connector (12-pin)
HR10A10R12PB
Interline Transfer type CCD with 768 (H) x 494 (V) pixels.
1/3" (6.00 (H) x 4.96 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)
Internal or External (Selectable Automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p]/75 ohms Horizontal drive and Vertical drive pulses
for 2 : 1 interlace
570 lines at center
1.0 lx (0.1 foot-candles),
(F1.4, Manual Gain Max (+6 dB), 2 : 1 interlace, without shutter)
56 dB Typical (Manual Gain Off (0 dB), 2 : 1 interlace without shutter)
1.0
0 - 6 dB, (Adjustable by Manual Gain Control on rear panel)
10-step (1/100 s to 1/96 000 s) at normal
C-Mount
10 G (10 Hz - 150 Hz) (2 hours each for three axes)
80 G (IEC 68) *IEC=International Electronical Technical Commission
DC +12 V, 170 mA
-10˚C - +50˚C (14˚F - 122˚F)
29 (W) x 29 (H) x 65 (D) mm [1-1/8" (W) x 1-1/8" (H) x 2-9/16" (D)]
86 g (0.19 lbs.) (Camera Only)
Pin No. Description
1 Ground
2 +12V IN
3 Ground for Video Out
4 Video Out
5 Ground for HD
6 HD IN
7 VD IN
8 Ground
9 No connection
10 No connection
11 No connection
12 Ground for VD
Printed in Japan
[P-455]