READ FIRST! Important Safety Precautions! moving the cart/apparatus combina- 18. An outside antenna system should CAUTION tion to avoid injury from tip-over. not be located in the vicinity of over- head power lines or other electric RISK OF ELECTRIC SHOCK 13.
THANK YOU FOR CHOOSING JBL For more than 60 years, JBL provide every note of enjoy- Web site at www.jbl.com. has been involved in every ment that you expected – It enables us to keep you aspect of music and film...
SPEAKER PLACEMENT FRONT CENTER CHANNEL SPEAKERS SPEAKER SUBWOOFER 0–2 ft (0–0.6m) SURROUND SPEAKERS 5 –6 ft (1.5–1.8m) The front speakers should be behind the listening position, placed the same distance facing forward. Additional from each other as they are satellites may be purchased from the listening position.
Step 3: Slide the Molded Nut supports and proper use of against the back of the ™ onto the Ball and Shaft the bracket. JBL disclaims Speaker ¶ and has locked £ with the threaded open- any liability for the selection the Ball and Shaft £...
To speaker wires to the satellite speakers and electronics, use banana-type connectors and center speaker termi- including JBL, use red to requires the removal of the nals, press the red or black denote the (+) terminal and inserts.
DOLBY ® DIGITAL OR DTS ® (OR OTHER DIGITAL SURROUND MODE) CONNECTION Frequency Effects channel. your receiver for 5.1-channel SUBWOOFER RECEIVER Connect this jack to the LFE operation, as appropriate. output or subwoofer output The front left, front right, LINE LFE OUT LEVEL on your receiver or amplifier.
DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- Left Front Right Front Center tions (not Dolby Digital, DTS or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled Subwoofer preamp (line-) level output: Connect your receiver or...
OPERATION Move the Master Power switch If you will be away from home (marked “Power” å) to the “ • ” for an extended period of time, (On) position to use the sub- or if the subwoofer will not be woofer.
• Check that the powered ble, visit www.jbl.com. ured so that the subwoofer subwoofer is plugged in, If there is no sound from the and LFE output are enabled.