Pc Compatibility Chart; Pc Control Of The Tv - Sharp Aquos LC-32LE155X Operation Manual

PC compatibility chart

Resolution
640 g 480
VGA
800 g 600
SVGA
1024 g 768
XGA
1360 g 768
WXGA
✴ 1080P ✴ 1920 g 1080
✴ : only for LC-39LE155X
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.

PC Control of the TV

• When a programme is set, the TV can be controlled from the PC
using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be
adjusted and various other adjustments and settings can be made,
enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the
Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
22
Horizontal
Frequency
31.5 kHz
37.9 kHz
48.4 kHz
47.7 kHz
67.5 kHz
9,600 bps
8 bits
None
1 bit
None
Vertical
VESA Standard
Frequency
✔
60 Hz
✔
60 Hz
✔
60 Hz
✔
60 Hz
60 Hz
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command and
sends a response message to the PC.
Do not send multiple commands at the same time. Wait until
the PC receives the OK response before sending the next
command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Command 4-digits:
Parameter 4-digits:
Parameter
Input the parameter values, aligning left, and fi ll with space(s)
for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, "ERR" returns.
(Refer to "Response code format".)
0
Response code format
Normal response
O
Problem response (communication error or incorrect
command)
Analogue
(D-Sub)
✔
✔
✔
✔
✔
Parameter 4-digits Return code
Command. The text of four characters.
Parameter 0 – 9, space, ?
a
0 0 0 9
K
Return code (0DH)
E R R
Return code (0DH)
Digital (HDMI)
✔
✔
✔
✔
✔
3 0