Audio Settings - Sharp Aquos LC-70UD1X Operation Manual

Basic adjustment
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e3 to a
minimum of f3.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Provides smoother image motion while
Advanced (High)
ensuring high-quality playback.
Adjust effect to reduce judder from film
Advanced (Low)
contents.
Standard Detects, analyses, converts film source.
Off Normal viewing mode.
NOTE
• Film mode is not selectable depending on the input signal
type.
DNR (Digital Noise Reduction)
"DNR" produces a clearer image ("Auto", "High",
"Middle", "Low", "Off").
NOTE
• This function may not be available depending on the input
signal type.
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e16 and a minimum of
f16.
NOTE
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Item

Audio settings

Go to "HOME" > "TV Menu" > "Setup" > "Audio".
CH list
: Select :Enter
Audio
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalising levels.
Strongly reduces the volume gaps
High
among different sound sources.
Middle
Slightly reduces the volume gaps among
Low
different sound sources.
Off Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
c (Cursor)
Item
Treble For weaker treble
Bass For weaker bass
Decrease audio
Balance from the right
speaker
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", press ?, press a/b to select
"Yes", and then press ?.
Menu
Setup
:Back
Audio
STANDARD
Auto volume
Treble
Bass
Balance
L30
Item
d (Cursor)
For stronger treble
For stronger bass
Decrease audio
from the left speaker
[Off]
R30
39