HTC Dream Service Manual page 88

Doc. Title
Gap between B、C parts of
3.
sliding cover phone
Others, refer to production
4.
release spec
STEP INSPECTIONS
Description
1. Step between mating parts.
Others, refer to production
2.
release spec
OTHERS
Description
Class A
Class B
Class C
Description
Class A
Class B
Class C
Description
Burr.
Description
Class A
Class B
Description
Class A
Class B
HTC CONFIDENTIAL
HTC Corporation
.
Dream Service Manual
Gap between B、C parts<0.5 mm
Others, refer to production release spec
(Step) < 0.3 mm
Others, refer to production release spec
Exposure of substrate do not accept
Scratch : L≦4mm ,W≦0.2mm ,N≦2, S≧10mm
Exposure of substrate do not accept
Scratch : L≦7mm ,W≦0.25mm ,N≦3, S≧10mm
Exposure of substrate do not accept
Scratch : L≦10mm ,W≦0.4mm ,N≦5, S≧5mm
Contamination dot/Granule dot/Cave granule
D≦0.5mm ,N≦2,S ≧15 mm (Ignored if D D≦ 0.15mm)
D≦0.6mm ,N≦4,S ≧15 mm (Ignored if D D≦ 0.25mm)
D<0.9mm ,N≦4,S ≧10 mm
Don't accept hand scrape
0.25≦diameter≦0.65mm ,N≦3
0.65≦diameter≦1.00mm ,N≦3
L≦2.5mm,W≦0.25mm,N≦3
L≦3.0mm,W≦0.25mm,N≦4
Scratch
Accept Criteria
Label area don't care
Accept Criteria
Burr
Accept Criteria
Imprint mark
Accept Criteria
Bright mark
Accept Criteria
Doc. No. DOC-00045020
Issued Date 2008/07/14
Revised Date 2008/10/20
Page 88 of 113
Accept Criteria
REV.
A04
MI
MI
MI
MI
MI
MI
MI
MI
MI
MI
MI