TYAN S5510 User Manual page 58

External SATA Port
External SATA support
[Disabled] / [Enabled]
Default is [Disabled]
SATA Device Type
Indentify the SATA port is connected to Solid State Drive or Hard Disk Drive
[Hard Disk Driver] / [Solid State Drive]
Default is [Hard Disk Driver]
Spin up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
[Enabled] / [Disabled]
Default is [Disabled]
Serial-ATA Controller 2/3/4/5
Software preserve
Port 2/3/4/5
Enable or disable SATA Port
[Disable]/[ Enabled]
Default is [Enabled]
Hotplug
Designates this port as hot pluggable
[Disabled] / [Enabled]
Default is [Disabled]
External SATA Port
External SATA support
[Disabled] / [Enabled]
Default is [Disabled]
Spin up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
[Enabled] / [Disabled]
Default is [Disabled]
58
http://www.TYAN.com