Shure WL50 User Manual page 7

SPECIFICATIONS WL50
Type Condenser (electret bias)
Polar Pattern Omnidirectional
Output Impedance N/A
Recommended Min. 20 kW
Input Impedance
Output Level -45.0 dBV/Pa (1 Pa=94 dB SPL)
Maximum SPL 133 dB at 1% THD/1 k ohm load
Frequency Response 20 to 20,000 Hz (see Figure 1)
Dynamic Range 103.0 dB
Output Noise 30 dB typical;
(equivalent SPL, 33 dB maximum
A-weighted)
Signal-to-Noise 64 dB at 94 dB SPL
Ratio
{ {
WL50–LO
Condenser (electret bias)
Omnidirectional
N/A
20 kW
-55.0 dBV/Pa (1 Pa=94 dB SPL)
143 dB at 1% THD/1 k ohm load
20 to 20,000 Hz (see Figure 1)
103.0 dB
40 dB typical;
43 dB maximum
54 dB at 94 dB SPL
7
}
MC50
Condenser (electret bias)
Omnidirectional
136 W actual
(rated at 150 W)
N/A
-41.0 dBV/Pa (1 Pa=94 dB SPL)
138 dB at 1% THD/1 k ohm load
20 to 20,000 Hz (see Figure 1)
108.0 dB
30 dB typical;
33 dB maximum
64 dB at 94 dB SPL