Commands (1); Timer (2); Timer Menu - Husqvarna AUTOMOWER 220 AC Operator's Manual

6.3 Commands (1)

This option in the main menu allows you to access
the following functions on Automower.
• Charge then AUTO (1-1)
in order for Automower to drive immediately to
the charging station, charge the battery and then
return to the automatic operating mode. Select
the function and press YES when the cursor is on
Yes.
• Show latest faults (1-2)
to show the list of saved fault messages. Browse
with the arrow buttons. The list can contain up to
20 fault messages and each message is shown
with the date and time.
• Make factory settings (1-3)
to restore all settings to their original values. All
except the selected language and PIN code are
reset. Select the function, enter your PIN code
and press YES when the cursor is on Yes.

6.4 Timer (2)

The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working
area is less than the mower's working capacity. When
Automower is allowed to mow too much, the lawn may
appear flattened. Besides, the mower is subjected to
unnecessary wear.
The timer function is also an ideal means to control
during which periods Automower should not mow, for
example, when the children are playing in the garden.
When you set the timer, assume that Automower
2
mows about 125 m per hour (75 m
• Timer override (2-1)
to temporarily disconnect the timer function.
• Day timer (2-2)
to set the start and stop times.
• Weekend timer (2-3)
to set other start and stop times for the days
Friday - Sunday.
• Week timer (2-4)
to select which days of the week Automower
should mow.
6. MENU FUNCTIONS
2
for 220 AC).
Commands
Timer
Garden
Settings
1
Commands
Timer
Garden
Settings
2
Charge then AUTO
Show latest faults
Make factory sett.
1-
Timer override
Day timer
Weekend timer
Week timer
2-
English - 47