Dhcp - Orion 3000 User Manual

Example:
CM>host-name set Customer1
Set host-name to"Customer1"
Customer1>
host-name delete
Delete host-name. It will change the command prompt to CM>.
tftp server {Server IP address}
Establishes the IP address of the TFTP server for firmware download
Example:
CM>tftp server 92.146.1.250
Set TFTP Server to 92.146.1.250

DHCP

dhcp {enable/disable}
Enable/disable dhcp server
dhcp ip-pool add {start IP} {end ip}
Set dhcp server ip pool range
Example:
CM> dhcp ip-pool add 192.168.100.2 192.168.100.4
CM>show dhcp
TFTP Server IP address : 172.19.89.19
Cable Modem IP address : 10.71.135.99
Configuration file : DEF001.cfg
Lease time : 86400 (secs)
UTC time offset : -28800 (secs)
SystemLog Server IP address : 172.19.89.19
Router IP address : 10.71.128.1
SubnetMask : 255.255.240.0
DHCP server enable
NAT DHCP Server Pool Table :
NAT DHCP server support 20 IP pools
NAT DHCP server support 512 IP, Created 3 IP
Pool Index Begin IP
1 192.168.100.2 192.168.100.4
Provision assigned DNS 68.4.16.30
Provision assigned DNS 68.6.16.30
DHCP server lease time : 1800
User's Guide
End IP
42