Bluetooth - Nokia C5-00 User Manual

44 Connectivity
With the Switch application, you can transfer content, such as contacts, between two
compatible Nokia devices.
The type of content that can be transferred depends on the model of the device from
which you want to transfer content. If the other device supports synchronisation, you
can also synchronise data between the other device and your device. Your device
notifies you if the other device is not compatible.
If the other device cannot be switched on without a SIM card, you can insert your SIM
card in it. When your device is switched on without a SIM card, the offline profile is
automatically activated.
The other device must support Bluetooth connectivity.
Transfer content
To retrieve data from your other device for the first time:
1 Activate Bluetooth connectivity in both devices.
2 Select the device from which you want to transfer content. You are asked to enter
a code on your device. Enter a code (1-16 digits), and select OK. Enter the same
code on the other device, and select OK. The devices are now paired.
For some device models, the Switch application is sent to the other device as a
message. To install the Switch application on the other device, open the message,
and follow the instructions.
3 From your device, select the content you want to transfer from the other device.
Content is transferred from the memory of the other device to the corresponding
location in your device.
Transfer time depends on the amount of data to be transferred. You can cancel the
transfer and continue later.
The synchronisation is two-way, and the data in both devices is the same. If an item
is deleted from either device, it is deleted from the other device when synchronising;
you cannot restore deleted items by synchronising.
To view the log of the last transfer, select a shortcut in the main view and
View log.

Bluetooth

About Bluetooth
Bluetooth technology in your device enables wireless connections between electronic
devices within a range of 10 metres (33 feet). A Bluetooth connection can be used to
Options
>