Kenwood TKR-750 Service Manual page 5

3. Programmable Functions
TKR-750 contains many Programmable Functions tabled below.
Programmable Function
AUX Out 1~5 Off
AUX I/O 1~6 Off
AUX Out 1~5 On
AUX I/O 1~6 On
AUX Out 1~5 On/Off
AUX I/O 1~6 On/Off
Channel 1~16
Channel Down
Channel Up
CW ID On
CW Message 1~8 On
Display Off
Display On
Display On/Off
Hold Time Enable
Hold Time Disable
Hold Time Disable/Enable
Local Tx Disable
Local Tx Enable
Local Tx Disable/Enable
Monitor Off
Monitor On
Monitor On/Off
Monitor Momentary
Multi Table Sub
Multi Table Main
Multi Table Main/Sub
QT/DQT Dec Disable
QT/DQT Dec Enable
QT/DQT Dec Disable/Enable
QT/DQT Enc Disable
QT/DQT Enc Enable
QT/DQT Enc Disable/Enable
Repeat Disable
Repeat Enable
Repeat Disable/Enable
Reset
DC Power Save Off
DC Power Save On
DC Power Save On/Off
OPERATING FEATURES
AUX Out 1 to 5 ports become deactivated, respectively.
AUX I/O 1 to 6 ports become deactivated, respectively.
AUX Out 1 to 5 ports become activated, respectively.
AUX I/O 1 to 6 ports become activated, respectively.
AUX Out 1 to 5 ports are toggled between its active and inactive states, respectively.
AUX I/O 1 to 6 ports are toggled between its active and inactive states, respectively.
Directly select Channel 1 to 16, respectively.
The channel decrements by one.
The channel increments by one.
The CW ID is transmitted.
The CW Message 1 to 8 is transmitted, respectively.
All panel LEDs are turned off except the Power LED.
All panel LEDs become active as normal status indicators on the repeater.
All panel LEDs, with the exception of the Power LED, are toggled between off and their normal status on
the repeater.
The Parameter of Repeat Hold Time is enabled.
The Parameter of Repeat Hold Time is disabled.
The Parameter of Repeat Hold Time is toggled between disabled and enabled.
The local mic's PTT is disabled.
The local mic's PTT is enabled.
The local mic's PTT is toggled between disabled and enabled.
The QT/DQT decoder is disabled.
The QT/DQT decoder is enabled.
The QT/DQT decoder is toggled between disabled and enabled.
The QT/DQT decoder is momentarily disabled.
Multi Table No. Select Signalling changes to the Multi Table Sub.
Multi Table No. Select Signalling changes to the Multi Table Main.
Multi Table No. Select Signalling changes between Multi Table Sub and Multi Table Main.
Disables the QT/DQT decode operation.
Enables the QT/DQT decode operation.
Toggles between disabling and enabling the QT/DQT decode operation.
Disables the QT/DQT encode operation.
Enables the QT/DQT encode operation.
Toggles between disabling and enabling the QT/DQT encode operation.
Disables repeater operation.
Enables repeater operation.
Toggles between disabling and enabling repeater operation.
Resets to default condition set up by FPU.
Activates DC Power Save Mode Off.
Activates DC Power Save Mode On.
Toggles between DC Power Save Mode On and Off.
Description
TKR-750
5