Table of Contents
Advertisement
T
O
HE
PERATION
The Operation Panel allows operator intervention and indicates
both when the printer is operating normally and when it requires
attention. Detailed printer status is provided by the Status
Monitor in Windows or Printer Driver in Mac.
Status Monitor" on page
The Operation Panel incorporates 3 LEDs and 2 push-button
switches as follows (from left to right):
>
Power (Ready) LED (green)
>
Paper LED (amber)
>
Alarm LED (amber)
>
ON LINE switch
>
CANCEL switch
The switches enable printer operation while the LEDs display the
status of the printer operation.
S
WITCHES
Operation
There are two switches on the operation panel labelled ON LINE
and CANCEL. Each has four modes of operation as follows:
MODE OF
OPERATION
Momentary press
(Press 1)
2-second press
(Press 2)
5-second press
(Press 5)
Press at Power On
P
ANEL
67.)
DESCRIPTION
Press the switch and release it within 2 seconds of pressing
it. On releasing the switch, operation starts.
Press the switch and hold for between 2 and 5 seconds after
pressing it. On releasing the switch, operation starts (except
in the case of a job cancellation).
Press the switch and hold it for 5 seconds or more. The
operation starts 5 seconds after pressing the switch, even if
you hold it pressed for more than 5 seconds.
At Power On, press the switch
Introduction > 12
(See "Using the
Advertisement
Table of Contents
