Setting A Goto Using Pan N Scan; Clearing Plotter Track - Magellan GSC 100 User Manual

When the cursor covers a waypoint icon on the screen, the title
bar displays the name of that waypoint and the bearing and
distance to the waypoint from your present position.

Setting a GOTO Using PAN N SCAN

When the cursor is on an icon and the waypoint information is
displayed, press ENTER.
A pop-up menu will appear with
the options GOTO or ESCAPE.
Use the UP/DOWN ARROWs to
highlight GOTO and press
ENTER. This will activate an
immediate GOTO route to the
specified destination.
To exit the PAN N SCAN screen, press ENTER when no
waypoint is covered by the cursor. The display returns to the
PLOT screen.

Clearing Plotter Track

As you use your receiver more, you may soon notice the PLOT
screen becoming cluttered with the graphic display of your past
movement (track). You can erase the track display with the
CLEAR MENU option in the AUXILIARY MENU.
Press the AUX softkey and use the UP/DOWN ARROWs to
highlight CLEAR MENU. Press ENTER and use the UP/
DOWN ARROWs to highlight TRACK and press ENTER.
You will be asked to confirm that you want to erase the track
history. If you change your mind, press any other key to leave
the track as it is. To erase track history press the YES softkey.
72
Magellan GSC 100 Global Satellite Communicator
G P
2
d
S
T O D O C K
B R G 202 D S T
m
C R E A T E W P T
N
G O T O
0 0 0 0 0 0
NAV PLOT GOTO
2:26P
n
1.92
m
n
M
n
1
m
AUX