Table of Contents
Advertisement
4.4.1.7 PMS User
The system integrates a hotel indoor billing system, PMS (Property Management System), developed by Micros
Fidelio, and it usually used in a hotel environment. When the customers need to use wireless Internet in the hotel,
they have to get a printed receipt with username and password form the hotel to log in the system for wireless
access. Choose "PMS User" in the Server Name field, the hyperlink beside the pull-down menu will become
"PMS User Configuration".
Server Status: The status shows that the server is enabled or disabled.
PMS Server IP: Enter the IP address of the PMS server.
PMS Server Port: Enter the Port of the PMS server.
Postfix: Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0 ~ 9), alphabets (a
~ z or A ~ Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters. All other letters are not
allowed.
Policy Name: There are five policies to select from.
Receipt Header 1/2: There are two fields, Receipt Header 1 and Receipt Header 2, for the receipt's header.
Enter receipt header message or use the default.
Receipt Footer: Enter receipt footer message here or use the default.
WLAN ESSID: Enter the ESSID of the AP.
Wireless Key: Enter the Wireless key of the AP.
Remark: Enter any additional information that will appear at the bottom of the receipt.
Chapter 4. Web Interface Configuration
97
Advertisement
Table of Contents
