Husqvarna 327P5X-series Operator's Manual page 11

- Filing angle
- Cutting angle
- File position
- Round file diameter
- File depth
1
5
It is very difficult to sharpen a chain correctly without the
right equipment. We recommend that you use our file
GENERAL SAFETY PRECAUTIONS
gauge. This will help you obtain the maximum kickback
reduction and cutting performance from your chain.
WARNING! The following faults will
!
increase the risk of kickback
considerably:
File angle too large
Cutting angle too small
File diameter too small
Sharpening cutting teeth
To sharpen cutting teeth you will need a round file and a
file gauge.
• Check that the chain is correctly tensioned. A slack
chain will move sideways, making it more difficult to
sharpen correctly.
• Always file cutting teeth from the inside face outwards.
Reduce the pressure on the return stroke. File all the
–
English 11