Sensing System For Passenger Airbag; Head Restraint Adjustment - GMC Yukon 2011 Owner's Manual

1-12 In Brief
Press the button once for the
highest setting. With each press of
the button, the seat will change to
the next lower setting, and then to
the off setting. The lights indicate
three for the highest setting and one
for the lowest.
See Heated and Ventilated Front
Seats on page 3 10.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the
head restraint height in the proper
position.
For more information see Head
Restraints on page 3 2 and Seat
Adjustment on page 3 3.
Safety Belts
Refer to the following sections for
important information on how to use
safety belts properly.
Safety Belts on page 3 21.
How to Wear Safety Belts
Properly on page 3 25.
Lap-Shoulder Belt on page 3 30.
Lower Anchors and Tethers for
Children (LATCH System) on
page 3 62.
Sensing System for
Passenger Airbag
The passenger sensing system,
if equipped, will turn off the right
front passenger frontal airbag
under certain conditions. The driver
airbags, seat mounted side impact
airbags (if equipped), and roof rail
airbags are not affected by this.
If the vehicle has one of the
indicators pictured in the following
illustrations, then the vehicle has a
passenger sensing system for the
right front passenger position.
The passenger airbag status
indicator, if equipped, will be visible
on the overhead console when the
vehicle is started.