How To Enable Fingerprint System Boot Authentication - Toshiba Satellite A200 User Manual

Authentication screen is displayed. This will switch the password input screen to
the keyboard-based one.
Note: ❑ It is necessary to register the User Password before using the
Fingerprint Power-on Security and its extended function, the
Fingerprint Single Sign-On Feature. Please use TOSHIBA
HW Setup to register the User Password.
❑ If you fail fingerprint authentication more than five times,
you must enter the User Password or Supervisor Password
manually to start the computer.
❑ When swiping, please do it slowly and at a constant speed. If
this does not improve the authentication rate, please adjust
the speed.
❑ If there are any changes in the environment or settings
related to authorization, you will be required to provide
authorization information such as a User Password and HDD
password.

How to Enable Fingerprint System Boot Authentication

Settings
It is necessary to first enroll your fingerprint with the Protector Suite QL applica-
tion prior to enabling and configuring the Fingerprint Power-on Security System.
Check that your fingerprint is enrolled before configuring the settings. See Man-
ual for Fingerprint Registration/Enrollment instructions.
1. Swipe your finger across the Fingerprint Sensor.
2. MENU appears in the lower right corner of the screen. Swipe your finger
overtop of the Fingerprint Sensor, and select Control Center from the
MENU items.
3. The Fingerprint Software Management screen is displayed to select
"settings" → "Power-on Security".
4. Power-on Security screen is displayed. Place a checkmark in Replace
the power-on and hard drive passwords with the fingerprint reader and click
OK.
The modified configuration for Fingerprint Power-on Security becomes effective
the next time the system is booted up.
User's Manual
Operating Basics
4-9