Rear Panel - Apex Digital dBZ-48 User Manual

Rear panel

3 
 
Rear panel
All connections to the dBZ-48 are made via the rear panel.
Rear panel connections for IN A are described: those for IN B
are identical. Similarly, the details of the output connections are
identical for all four channels.
Input A L & R. Inputs are on latching 3-pin female XLRs,
1
with separate connectors for left and right channels. The inputs
are electronically balanced. The pinout is as shown below:
PIN XLR (female)
1 GND
2 'Hot' ( + )
3 'Cold' ( - )
Output 1 L & R. Outputs are on 3-pin male XLRs, with
2
separate connectors for left and right channels. The outputs
are electronically balanced. The pinout is as shown below:
PIN XLR (male)
1 GND
2 'Hot' ( + )
3 'Cold' ( - )
2
IEC receptacle for AC mains.
3
A POWER switch of the 'rocker' type applies power to the

unit.
Mains fuse holder. The fuse size is 20 x 5 mm, type T500mA

(slo-blo). Only replace a fuse with one of an identical size, type
and rating.
The unit's serial number can be found on the rear of the

unit. Please record this number in the space provided on the
first page of this manual.
1
11