Description Of Icons; Navigating The Menus; Navigation Button And Select Switch For Fwd/Dnd/Absent Msg - Samsung OfficeServ SMT-i5210 User Manual

DESCRIPTION OF ICONS

The following icons are displayed on the screen.
Icon
Shows that 'Call Forward' is enabled.
Shows that 'Do Not Disturb' is enabled.
Shows that 'Mute' function is enabled. When the call ends to
become a standby status or this function is disabled, this icon
disappears.
Shows that the call is hold state. When call is reconnect or
disconnected, this icon disappears.
Appears when there are unread short messages in the
message inbox. Once they are read, it disappears.
Shows that a LAN cable is connected to the PC port.
Shows that a LAN cable is connected to the LAN port but that
the system is not connected.
Shows that a LAN cable is connected to the LAN port and
that the system is connected normally.
Outgoing Call icon.
Incoming Call icon.
Missed Call icon.
Appears when the Speaker button is active.
Appears when the Headset button is active.
Shows when there is a Cell phone number for the entry in the
Phone Book.
Shows when there is a Home phone number for the entry in
the Phone Book.
Shows when there is a Office phone number for the entry in
the Phone Book.
Shows when there is an internal Extension number for the
entry in the Phone Book.
12
Description

NAVIGATING THE MENUS

When programming within various menu options, information can be entered via
the dial pad keys using [0]-[9] and [Q Q ] dial keys. The button used for editing and
their features are summarized below.
BUTTONS
Volume + and - To move the cursor left and right, up and down.
Hold To clear/delete an entire field such as station name.
Transfer To write the changes and exit programming.
Speaker To write the changes and exit programming.
NAVIGATION BUTTON and SELECTOR
SWITCH FOR FWD/DND/ABSENT MSG
The SMT-i5210 phone has a navigation button and a Selector Switch for
FWD/DND/ABSENT MESSAGE to allow users to use its functions easily.
Selector Switch
Navigation Button
The Selector Switch can be used to manually set and cancel station Call
Forwarding and Do Not Disturb. NOTE: Do not use the access codes or the func-
tion menu to cancel FWD/DND/ABSENT MESSAGE when the selector switch is set
in the left or right position because the switch takes precedence over the access
codes/function menu.
BUTTON
Left
Selector Switch Center
Right
Direction Key
Navigation
OK/Enter
FEATURES
Up Navigation Button
Right
Left
Navigation
Navigation
Button
Button
OK/Enter Button
Down Navigation Button
FUNCTION
Users can set the phone to the call forward
state.
The default standby status. (Normal Mode)
This is set to "Do Not Disturb" and absent
message status.
Users can edit the contents on the screen or
move between menu items.
Users can select or save the item where a
cursor is placed in a menu mode.
Users can check the caller information
received from a station line during receiving.
13