Configuring Softkeys - Aastra 6867i User Manual

Configuring Softkeys

Your 6867i has 6 multi-functional left softkeys and 4 multi-functional bottom softkeys:
• 6 left softkeys: programmable non-state-based softkeys (up to 20 programmable functions)
• 4 bottom softkeys: programmable state-based softkeys (up to 18 programmable functions)
Note:
If M680i Expansion Modules are attached to the phone, you can configure up to an additional 16 softkeys on each
M680i Expansion Module. The 6867i IP phone allows up to 3 expansion modules on each phone. For more information
about expansion modules, see
You can use the Aastra Web UI to configure key functions.
The following table lists the functions you can set on the softkeys and provides a description for each function.
Key Function
None
Line
Speed Dial
Do Not Disturb
BLF
BLF/List
Auto Call Distribution (ACD)
XML
Flash
Sprecode
Park
Pickup
Last Call Return
41-001524-00 REV00 – 04.2014
Left
Softkeys
"Model M680i Expansion Module"
Description
Indicates the key has no function assigned.
Indicates the key is configured for line use (programmable on the left softkeys only).
Indicates the key is configured for speed dial use.
Indicates the key is configured for Do Not Disturb (DND) functionality.
Indicates the key is configured for Busy Lamp Field (BLF) functionality (programmable on the left softkeys only).
Indicates the key is configured for BLF/List functionality (programmable on the left softkeys only).
(For Sylantro Call Managers)
Indicates the key is configured to allow the Sylantro call managers to distribute calls from a queue to registered IP
phone users (agents) (programmable on the left softkeys only).
Indicates the key is configured to accept an XML application for accessing customized XML services.
Indicates the key is set to generate a flash event when it is pressed. The IP phone generates flash events only when a
call is connected and there is an active RTP stream (for example, when the call is not on hold).
Indicates the key is configured to automatically activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the Sprecode key, *82 automatically activates a service pro-
vided by the call mangager.
Indicates the key is configured to park incoming calls when pressed.
Indicates the key is configured to pick up parked calls when pressed.
Indicates the key is configured for Last Call Return functionality when pressed.
Bottom
Softkeys
on page 163.
57