Network Setup; Ethernet Network (Wired) Setup - Western Digital Media Player User Manual

Network Setup

5
The media player can be connected to the local area network using a wired or
wireless network connection for access to streaming video and online and offline
media content.

Ethernet Network (Wired) Setup

Follow these steps to automatically set up a wired network connection:
1. Press
press OK.
2. Plug an Ethernet cable into the Ethernet connector on the media player.
3. Plug the opposite end of the Ethernet cable directly into a LAN port on a router or
network switch.
4. The wizard begins automatic network connection. Select your time zone and
press OK.
Note: You can change the time zone/location where you set up the media player if you move to a
different area. See "Set Time & Country" on page 202.
/ to select your language in the setup wizard Welcome screen, then
WD TV Media Player
User Manual
NETWORK SETUP – 23