Smart Search Operation - Yaesu FT-817nd Operating Manual

Hf/vhf/uhf all mode transceiver yaesu
Hide thumbs Also See for FT-817nd:
Table of Contents

Advertisement

The Smart Search
on the current band. When Smart Search
above your current frequency, storing active frequencies as it goes (without stopping on
them even momentarily). These frequencies are stored in a special Smart Search
bank, consisting of 50 memories. This feature available on the FM and AM modes.
The Smart Search™ feature is especially helpful when traveling, as you can instantly store
active FM repeater frequencies without having to look up the frequencies in a reference
book.
1. Set the
ting, for effective Smart Search
from this position.
2. Set the VFO to the frequency on which you wish to begin the search (the Smart Search
feature is available on the VFO mode only).
3. Press the
key momentarily, then rotate the
Function Row 6 [ SSM, SCH, ART ] appears on the display.
4. Now press the
on the LCD, and the transceiver will sweep upward on the current band, loading chan-
nels on which it encounters a signal strong enough to open the squelch.
5. All channels where activity is present (up to 50 channels) will be loaded into the Smart
Search
memories. Whether or not all 50 memories are filled, the search will stop after
one sweep.
6. Now you can turn the
ries. If you find frequencies you wish to store into a "regular" memory, just follow the
procedures described previously; just don't press the
memories, because this will disable Smart Search™ operation (see step 7).
7. To disable Smart Search
The Smart Search™ memories are so-called "soft" memories; they will be lost if
you initiate a new Smart Search
FT-817
Operating Manual
S
S
MART
feature automatically stores frequencies where activity is encountered
knob to the point where background noise is silenced. A typical set-
operation, will be at 12 o'clock or slightly clockwise
( SCH ) key momentarily; the blinking "SRCH" indicator will appear
knob to select from the just-stored Smart Search
operation, press the
™ O
EARCH
is engaged, the transceiver quickly searches
knob, as needed, until Operating
( SCH ) key momentarily.
sweep of the band.
PERATION
( SCH ) key while storing these
memory
memo-
51

Advertisement

Table of Contents
loading

Table of Contents