Cd Player; Simple Playback Operations; Time Display Modes; Track Search - Tascam CC-222 Owner's Manual

4 – CD player
The CC-222 can be used to play back CDs (including
CD-R and CD-RW discs that have been recorded and
finalized on other types of recorder), as well as CD-R

Simple playback operations

1 Press the
OPEN/CLOSE
tray.
2 Discs should be inserted in the tray with the
label uppermost.
3 Press the
OPEN/CLOSE
again.
When a disc is loaded into the unit, the display
briefly shows
TOC Reading.
period following the word "Reading" as the unit
determines the contents of the disc. When the TOC
has been read, the display shows (at the left of the
display) one of the following:

Time display modes

When playing back a CD (or when in pause mode),
there are four different time display modes.
In each mode, the current track number is given, fol-
lowed by the time, as given below, e.g.
10 0:48
Tr
Press the key to cycle through these time
DISPLAY
display modes, as described here:

Track search

Use the (or the
MULTI DIAL
remote control unit) to jump forward or backward by
one track at a time, as shown on the display.
Note that going forward from the last track of the
disc will "wrap round" to track 1, and going back-
ward from the first track of the disc will "wrap
round" to the last track of the disc.
20
TASCAM CC-222 Owner's Manual
key to open the disc
key to close the tray
, with a flashing
keys on the
SKIP
discs and CD-RW discs that have been recorded on
the unit.
CD A commercial pre-recorded CD or a
finalized CD-R
CD-R, NO TOC A CD-R which has yet to be finalized
A CD-RW which has yet to be finalized
CD-RW, NO TOC
CD-RW A finalized CD-RW (this differs from a CD,
as it may be unfinalized and erased)
[blank] Unusable or unreadable disc or no disc
1 Press the key to start playback
PLAY
2 Press the
STOP key to stop playback
3 Press the key to pause playback
PAUSE
temporarily.
The track number indicators at the bottom of the dis-
play light, to show the available unplayed tracks. If
there are thirteen tracks on the disc, for example,
indicators through will light. If there are more
1 13
than 20 tracks on a disc, the track number
cator (at the bottom of the display) will light.
Display shows Meaning
TOTAL Total elapsed time of the disc
[blank] Elapsed time of the current track
TOTAL REMAIN Time remaining of the current disc
REMAIN Time remaining of the current track
NOTE
If programmed playback has been selected ("Pro-
grammed order playback" on page 21), the elapsed
time and total remaining time refer to the programmed
material, not the whole disc.
The track number indicators at the bottom of the dis-
play shows the selected track (the lit indicator at the
left of the row of indicators).
It is also possible to use the number keys on the
remote control unit to jump directly to a particular
track:
1 To play tracks 1 through 9, simply press the
appropriate key ( 1
indi-
OVER
through 9 ).