Hdd Viewer Software Installation - D-Link mydlink DNR-202L User Manual

Section 2: Assembly and Installation
Your DNR-202L comes with a convenient application to assist you in managing your recorded video. If you have the HDD Viewer
installed, you will be able to remove a USB HDD from the DNR-202L and plug it into your computer to review recorded video.
This section will guide you thrugh the easy-to-use HDD Viewer Setup Wizard.
Step 1
Attach the hard disk containing the DNR-202L video recordings you wish to view
to your computer.
Step 2
Open your web browser and go to http://www.mydlink.com/support. Click on
the Storage tab, and then select the DNR-202L from the row of products. Click
on the link to download the HDD Viewer Setup Wizard.
Step 3
Follow the on-screen prompts to install the software. You will see a message that
says, HDD Viewer has been installed on your computer.
Make sure the box is checked by Run HDD Viewer. Click Finish to close the HDD
Viewer Setup Wizard.
D-Link DNR-202L User Manual

HDD Viewer Software Installation

20