Creative SB1390 (SBX 10) User Manual page 5

Connectivity - Input / Output Jacks
1
2
3
4
Jack Description
Connect A blue LED indicates that the Sound BlasterAxx is
connected with a Bluetooth enabled device.
Button
l
l
l
l
Note:
to connect to a paired Bluetooth device
automatically when the Sound BlasterAxx is turned
on. Refer to Advanced Feature for details.
MicroUSB Connects to USB ports of PC / laptop for audio
output.
Headphone Connects to stereo headphones with a 3.50mm
(1/8-inch) plug.
Aux / Mic In Connects to line-level sources (such as MP3
players) or microphones with a 3.50mm (1/8-inch)
plug. You can manually switch between AUX and
MIC inputs via the Control Panel > Sound
interface.
Ensure the Sound BlasterAxx is powered on.
Press and hold Connect button for 4 seconds to
enter pairing mode.
Turn on Bluetooth feature on your device.
Search and select Sound BlasterAxx SBX 20 or
Sound BlasterAxx SBX 10. If password is
required, enter 0000 and connect to it.
Enable the "Bluetooth Auto Connect" feature