Storing The Tire Sealant And Compressor Kit - Chevrolet Malibu 2012 Owner's Manual

Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Screw the connector (B) to the
canister (A).
7. Slide the plastic cover back on.
Vehicle Care
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor kit
is located in the trunk.
1. Open the trunk. See Trunk on
page 2 9.
2. Lift the cover.
3. Turn the retainer clockwise and
remove the tire sealant and
compressor kit.
To store the tire sealant and
compressor kit, reverse the steps.
10-73