Air Purifier Maintenance; Cleaning Your Air Purifier; Changing The Pre-Filter - Hunter 37711 Owner's Manual

Hunter owner's manual air purifier 37710, 37711
Table of Contents

Advertisement

Available languages

Available languages

Air Purifier Maintenance

Cleaning Your Air Purifier

Proper maintenance of your Hunter Air Purifier will help ensure years of trouble free
service.
Follow these steps to properly maintain your air purifier:
1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,
damp cloth.
2. If needed, the front grill can be removed from the unit and cleaned with soapy water.
Simply remove the pre-filter before exposing the grill to water.
3. Follow the instructions in Changing the Pre-Filter and Changing the Filter (pgs. 10 and
11) to determine when and how to replace the filters.
NOTES:
• The air purifier must be unplugged during the cleaning process.
• Be sure the unit is completely dry before plugging in and using.
• Never immerse unit in water.

Changing the Pre-Filter

When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional informa-
tion, pg. 8), the Pre-Filter indicator will turn on as a reminder that you should replace the
pre-filter. To maintain proper odor-removing capability and overall filtration performance,
the pre-filter should be changed every 1400 hours (approximately 3 months of use). If
necessary, the pre-filter can be changed more often. Proper maintenance of the pre-filter
will help extend the life of the HEPAtech
13) if you need help finding replacement filters.
To change the pre-filter and reset the Pre-Filter Life Counter:
1. First, turn off and unplug the air purifier.
2. Next, remove the front grill. Place your fingers under the handle on the grill
and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3. The pre-filter is attached to the inside of the grill with hook tape. Pull gently
on the pre-filter to remove it. Refer to Fig. 9.
4. If needed, use a soft damp cloth to wipe off the grill.
5. Install the new pre-filter by placing it in the grill and pressing gently on the
pre-filter so that it adheres to the hook tape. You may notice a few black par-
ticles coming off the pre-filter. Those particles are part of the odor-removing
activated carbon and will be collected on the filter during regular use.
43007-01
filter. Refer to Obtaining Replacement Filters (pg.
®
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

37710Hepatech plus 37711Hepatech plus 37710

Table of Contents